Load data for .380 ACP (9mm kurz) + .355 | 90gr | Nosler HP

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.355 \| 90gr \| Nosler HP
Manufacturer SKU:	42050
Bullet Weight:	90gr \| 5.8g
Bullet Diameter:	0.355" \| 9.02mm
Bullet Length:	0.403" \| 10.2mm
Caliber:	.380 ACP (9mm kurz) load data
Case Length (l3):	0.681" \| 17.3mm
Cartridge Length (C.O.L.):	0.969" \| 24.6mm
Seated Depth:	0.115" \| 2.9mm
Shank Seated Depth:	0.115" \| 2.9mm
Case Capacity:	11.5 Grains of Water \| 0.75 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	19580 psi \| 1350 bar
LID:	LID_B4154_C608
Last updated:	2026-01-23

Load data for 74 loads in caliber .380 ACP (9mm kurz) with .355 | 90gr | Nosler HP bullet and 37 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N	<<locked>>	68%	17245	88%	**55	96%
ADI APS 350	<<locked>>	63%	17434	89%	**4	100%
ADI APS 450	<<locked>>	65%	16955	87%	**24	100%
ADI AS 30	<<locked>>	71%	17013	87%	**76	100%
ADI AS 50N	<<locked>>	70%	16998	87%	**06	99%
[Accurate No. 2]*	<<locked>>	75%	17318	88%	**99	83%
Accurate Solo 1000	<<locked>>	70%	16882	86%	**76	99%
Accurate Solo 1250	<<locked>>	83%	17492	89%	**38	95%
[Alliant BULLSEYE]*	<<locked>>	70%	17434	89%	**55	89%
[Alliant Sport Pistol]*	<<locked>>	66%	17390	89%	**52	88%
[Alliant UNIQUE]*	<<locked>>	84%	17274	88%	**75	88%
Baschieri & Pellagri 100	<<locked>>	76%	17434	89%	**02	98%
Baschieri & Pellagri 102 Pistol	<<locked>>	96%	15476	79%	**12	99%
Baschieri & Pellagri 103 Pistol	<<locked>>	76%	17608	90%	**55	99%
Hodgdon Clays	<<locked>>	63%	17361	89%	**07	100%
Hodgdon Universal	<<locked>>	75%	17245	88%	**55	96%
Hodgdon CFE Pistol	<<locked>>	78%	17303	88%	**48	94%
Lovex S011	<<locked>>	63%	17042	87%	**93	96%
Lovex S020	<<locked>>	78%	17492	89%	**65	91%
Maxam CSB 1	<<locked>>	85%	17187	88%	**29	95%
Maxam CSB 2	<<locked>>	89%	17390	89%	**17	99%
Maxam CSB 3	<<locked>>	77%	16911	86%	**22	98%
Maxam CSB 4	<<locked>>	74%	17202	88%	**12	100%
Maxam CSB 5	<<locked>>	68%	16795	86%	**79	100%
[Ramshot Silhouette]*	<<locked>>	69%	17579	90%	**58	85%
ReloadSwiss RS 12 👍	<<locked>>	77%	17361	89%	**07	100%
ReloadSwiss RS 20	<<locked>>	88%	17376	89%	**91	90%
Rottweil P 801	<<locked>>	68%	16998	87%	**58	100%
[SNPE Vectan A0]*	<<locked>>	83%	17260	88%	**12	87%
SNPE Vectan BA 9	<<locked>>	74%	17376	89%	**06	92%
SNPE Vectan BA9 1/2	<<locked>>	76%	17114	87%	**32	94%
[Somchem MP200]*	<<locked>>	76%	17593	90%	**52	86%
[Somchem MS200]*	<<locked>>	79%	17202	88%	**32	89%
Vihtavuori N320 👍	<<locked>>	76%	17202	88%	**45	100%
Vihtavuori N32C Tin Star	<<locked>>	95%	14315	73%	**43	100%
Vihtavuori N330	<<locked>>	82%	17448	89%	**88	96%
[Vihtavuori N340]*	<<locked>>	82%	16998	87%	**38	88%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 70N	<<locked>>	60%	13431	69%	**47	92%
ADI APS 350	<<locked>>	61%	16563	85%	**8	100%
[ADI APS 450]²	<<locked>>	59%	14678	75%	**1	100%
ADI AS 30	<<locked>>	60%	12705	65%	**1	100%
ADI AS 50N	<<locked>>	60%	13213	67%	**4	96%
[Accurate No. 2]*	<<locked>>	69%	14663	75%	**27	80%
[Accurate Solo 1000]²	<<locked>>	59%	12908	66%	**8	97%
[Accurate Solo 1250]*	<<locked>>	62%	9921	51%	**9	85%
[Alliant BULLSEYE]*	<<locked>>	61%	13677	70%	**40	84%
[Alliant Sport Pistol]*	<<locked>>	60%	14895	76%	**76	84%
[Alliant UNIQUE]*	<<locked>>	69%	11922	61%	**04	80%
Baschieri & Pellagri 100	<<locked>>	62%	11719	60%	**5	93%
[Baschieri & Pellagri 102 Pistol]*	<<locked>>	66%	7556	39%	**0	89%
Baschieri & Pellagri 103 Pistol	<<locked>>	60%	10950	56%	**1	94%
Hodgdon Clays	<<locked>>	61%	16462	84%	**1	100%
[Hodgdon Universal]*	<<locked>>	60%	11269	58%	**1	89%
[Hodgdon CFE Pistol]*	<<locked>>	62%	10689	55%	**8	86%
Lovex S011	<<locked>>	60%	15722	80%	**56	95%
[Lovex S020]*	<<locked>>	61%	10646	54%	**1	81%
[Maxam CSB 1]*	<<locked>>	62%	9674	49%	**9	84%
[Maxam CSB 2]*	<<locked>>	61%	8050	41%	**6	88%
Maxam CSB 3	<<locked>>	61%	10776	55%	**5	92%
Maxam CSB 4	<<locked>>	62%	12357	63%	**4	97%
Maxam CSB 5	<<locked>>	61%	13692	70%	**04	100%
[Ramshot Silhouette]*	<<locked>>	62%	14083	72%	**60	80%
ReloadSwiss RS 12	<<locked>>	61%	10878	56%	**17	97%
[ReloadSwiss RS 20]*	<<locked>>	71%	11110	57%	**1	80%
Rottweil P 801	<<locked>>	61%	13677	70%	**73	100%
[SNPE Vectan A0]*	<<locked>>	70%	12270	63%	**5	80%
[SNPE Vectan BA 9]*	<<locked>>	62%	12154	62%	**8	86%
[SNPE Vectan BA9 1/2]*	<<locked>>	60%	10834	55%	**8	86%
[Somchem MP200]*	<<locked>>	66%	13111	67%	**24	80%
[Somchem MS200]*	<<locked>>	62%	11284	58%	**2	80%
[Vihtavuori N320]²	<<locked>>	59%	10530	54%	**5	95%
Vihtavuori N32C Tin Star	<<locked>>	68%	7527	38%	**7	98%
[Vihtavuori N330]*	<<locked>>	62%	10109	52%	**5	87%
[Vihtavuori N340]*	<<locked>>	69%	11879	61%	**4	81%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data